专用集成电路与系统国家重点实验室
讲座信息

Topic:      Stress and Reliability for 3D Interconnects: A Material and Processing Perspective
Speaker: Dr. Tengfei Jiang (the University of Central Florida (UCF))
Time:       10:00-11:00, Friday, 17th June 2016
Location: 邯郸校区微电子楼B213会议室

Abstract
Materials In the era of big data and internet of things, three-dimensional integrated circuit (3DIC) has emerged as a promising approach to overcome the limitations imposed on chip design, performance, and form factor in Moore’s law scaling. Cu through-silicon vias (TSVs) are used in a 3DIC to provide short vertical interconnections between stacked dies. While the benefits of 3D integration have been recognized for more than a decade, mass production of 3DIC devices has been challenging due to cost, yield, and reliability issues. In particular, the mismatch in the coefficient of thermal expansion between Cu and Si can induce a considerable amount of stress in and around the TSV to seriously degrade yield and reliability. This presentation will first review TSV-based 3D integration technologies, and then discuss the effect of material and processing on the thermal stress and its reliability consequences in TSV structures. Potential approach based on materials, processing, and design optimization to improve reliability will also be explored.

Biography
Dr. Tengfei Jiang is an Assistant Professor in the Department of Materials Science and Engineering at the University of Central Florida (UCF). Before joining UCF in Fall 2015, Dr. Jiang was a postdoc researcher in the Laboratory for Interconnect and Packaging at the University of Texas at Austin in Summer 2015 and worked in the Advanced Technology Integration group at Qualcomm Technologies, Inc. in Summer 2013. Dr. Jiang received the B.S. degree from Tsinghua University, Beijing, China in 2006, the M.S. degree from The Ohio State University, Columbus, OH, in 2009, and the Ph.D. degree from the University of Texas at Austin, Austin, TX, in 2015, all in Materials Science and Engineering. Dr. Jiang’s research interest is in the area of materials, processing, and reliability for advanced technologies such as micro/nano-electronics and micro/nano-manufacturing.

 

 
 
 
 

 

Copyright© 2003-2018 复旦大学微电子学院
联系我们